CURING INSTRUCTIONS:

Thermobond 3 powder coating filler must be cured by heat. 

Cure recommendations are as follows:

10 minutes @ 375 degrees F surface temp
07 minutes @ 400 degrees F surface temp
05 minutes @ 425 degrees F surface temp

Longer cure time at lower temperatures is recommended to

allow the metal filler material to adhere properly to

the substrate without blistering. 

Thermobond 3 powder coating filler will not air dry.

Please feel free to talk to a technical representative if you

have any questions. 951-245-7778

Order Thermobond 3